ATLONA AT-UHD-EX-100CE-RX HDBaseT Receiver with Control and PoE

HDBaseT HDMI 4K/UHD@60Hz receiver up to 100 meters. It supports the transmission of Ethernet, RS-232 and CEC signals together with the HDMI signal in a single CAT5e/6 cable for 1080p signals up to 100m and CAT6a/7 for 4K/UHD signals up to 100m. Supports embedded multichannel audio. It supports HDCP 2.2 and supports EDID communication. It is ideal for use with the AT-UHD-EX-100CE-TX-PD HDBaseT transmitter, or with an HDVS-200 Series HDBaseT switcher to extend 4K signals to a display. The receiver has a quarter rack width metal enclosure for installation, with I/O ports on the rear panel for trouble-free cable management. This receiver is powered externally by the included power supply and provides power over Ethernet for the AT-UHD-EX-100CE-TX-PD, an HDVS-200 HDBaseT switcher or other HDBaseT PoE compatible transmitter.

Specifications

• 4K/UHD@60Hz compatibility with 4:2:0 chroma key subsampling
• Supports HDCP 2.2. Allows protected content streaming to pass between devices
• Supports 4K HDR10 @24Hz (4:2:0 chroma key subsampling, 10-bit color)
• Receiver power supplied by transmitter via HDBaseT (PoE) or via included external power supply
• HDBaseTTM receiver for HDMI, Ethernet, power and control up to 330 feet (100 meters)
• Receives RS-232, CEC and Ethernet control signals via HDBaseT
• Rear panel I/O connections to simplify cable management
• Multi-channel audio support for all PCM, Dolby and DTS formats
• Firmware upgradeable in real time via front panel USB port
• Power status LEDs and HDBaseT link on front panel for easy setup and troubleshooting
• Low-profile chassis, 25mm (1 inch) and 1/4 rack width