

Sony VPL-XW5000ES - native 4K laser projector with 2,000 lumens
- $5900.00
- $5900.00
Sony VPL-XW5000ES
The VPL-XW5000ES is a watershed moment for not just Sony’s projection business but the home cinema world in general. Why? Because it’s the cheapest truly native 4K laser projector the home cinema world has ever seen.
Bring true 4K HDR entertainment into your home with the VPL-XW5000ES, a native 4K laser projector with 2,000 lumens of high brightness and a compact, cost-effective design1. Sony’s advanced technologies, including the all-new Native 4K SXRD panel, delivers wide dynamic range, high resolution, and vivid color, even in bright viewing spaces.
Specifications
- Display System: 4K SXRD panel, projection system
- Display Device
- Size of effective display area: 0.61” x 3
- Number of pixels: 24,883,200 (3840 x 2160 x 3) pixels
- Projection Lens
- Focus: Manual
- Zoom: Manual (Approx. x 1.60)
- Lens shift: Manual, Vertical +/- 71%, Horizontal +/- 25%
- Throw ratio: 1.38:1 to 2.21:1
- Light Source: Laser Diode
- Light Output: 2,000 lm
- Dynamic Contrast: Infinity:1
- Accepted Digital Signals
- 720 x 576/50p, 720 x 480/60p, 1280 x 720/50p, 1280 x 720/60p, 1920 x 1080/50i, 1920 x 1080/60i, 1920 x 1080/24p, 1920 x 1080/50p, 1920 x 1080/60p, 1920 x 1080/120p, 3840 x 2160/24p, 3840 x 2160/25p, 3840 x 2160/30p, 3840 x 2160/50p, 3840 x 2160/60p, 4096 x 2160/24p, 4096 x 2160/25p, 4096 x 2160/30p, 4096 x 2160/50p, 4096 x 2160/60p
- Input/Output
- HDMI: x2 (HDCP2.3)
- Trigger: x1 (Mini jack, DC 12V, Max. 100 mA)
- RS-232C: x1 (D-sub 9-pin (male))
- LAN: x1 (RJ-45, 10BASE-T/100BASE-TX)
- IR In/Out: IN: x1 (Mini jack)
- 3D Sync out: None
- USB: x1 (Type A, DC 5V, Max. 500 mA)
- Picture Processor: X1 Ultimate for projector
- Object-Based HDR Remaster: Yes
- Dynamic HDR Enhancer: Yes
- Object-Based Super Resolution: Yes
- Dual Database Processing: Yes
- Digital Contrast Optimizer: Yes
- Digital Focus Optimizer: Yes
- Dynamic Contrast Control: Dynamic laser control
- Motionflow: Yes
- HDR Format: HDR10/HLG
- 3D: No
- Picture Position Memory: None
- Input Lag Reduction: Yes (4K/2K)
- Acoustic Noise: 24 dB
- Power Requirements: AC 100-240V, 50/60 Hz
- Power Consumption
- Standby: 0.3W (when “Remote Start” is set to “Off”)
- Networked Standby
- 0.5W (LAN)(when “Remote Start” is set to “On”)
- When a LAN terminal is not connected, it becomes a low power consumption mode (0.5W)
Dimensions (Without Protrusions): 18 1/8 x 7 7/8 x 18 19/32 (WxHxD)
- Mass: 28 lbs
- Supplied Accessories
- Remote Control (RM-PJ28)
- Size AA (R6) manganese batteries (2)
- AC Power Cord
- Lens Cap
- Setup Guide
-
Share -
Tweet -
Pin it